In order to have power in your home to operate the heat and your appliances, you do need to have electrical factory and wiring. This is one part of the construction phase that has to be done by a marvelous professional. You should never attempt to install whatever associated with the electricity if you do not have the proper training.
Some of the basic law of electrical work are:
* Never start working with electricity until the power supply to the home has been shut off.
* Wires of the same color connect to each other.
* When installing receptacle boxes, you push the bare end of the wire into spring grip holes. The boxes have labels to tell you what color wires go into each hole.
* The black wires in the cables are used for connecting switches.
* The wiring used in homes is estimate 12 or 14 gauge wiring.
* For any extended wiring circuit, all the time use the same size cable for the continuation.
When you are associated new wiring to the existing wiring in the home, you should all the time do so in the last outlet on the run of cable. You can find the last outlet by removing the plate to see how many wires are associated in the outlet. The last one will have wires associated to only two of the concluding screws. The two remaining concluding screws will be the beginning point for the new writing. You do have to check to see which gauge cable was used and you have to continue with this.
Unless the junction box is full, you can also attach new wiring to this box. Trace the cable back to see what voltage is on it so that you won't connect a 120- voltage to one that has 240- voltage. Locate the white wires in the box and attaché the new white wires at this point.
Saved Snow Joe Snow Thrower 1 4 Zip Pullover Sweatshirt Buy Electrical Wire Connectors Best Price
No comments:
Post a Comment